Orthokeratology Contact Lenses

What Do I Need to Get Started: The Importance of the Fitting Set

Sponsored content

By Matthew Martin, OD, FIAOMC

In our practice, we specialize in Ortho-K, and two aspects are critical to our success: the use of fitting sets in the contact lenses we select for our patients, along with specialized scheduling. We need to keep focused on the patient experience, and that includes accommodating the increased time and commitment needs of our busy patients who elect to do Ortho-K.

In my office I have several fit sets that I employ to get an initial assessment of the relationship between a given Ortho-K lens design and the cornea. The fitting sets that I employee are compact and take up very little space in our busy office (I keep them under my desk in my main exam room). These sets are relatively small and contain from 20-100 Ortho-K lenses, often stored dry in flat packs.

Fitting sets can also be used as “Wow” sets. Often, when doing an assessment for a child with the parents present, I will select the best fit for the child and place the Ortho-K lens on the child. While the child sits with their eyes closed, I will discuss with the parents the pros and cons of Ortho-K, along with risks, benefits, etc. After 20-30 minutes of discussion, I remove the retainers from the child and do a quick visual assessment. About 95 percent of the time, there is a significant improvement in the vision for the child often getting to a full 20/20 after just 20-30 minutes. This a Wow moment during the consult, and it really brings home the efficacy of this exciting specialty.

Our standard intake procedure for Ortho-K is to conduct the lens fitting in steps. We begin with a consult where we explain orthokeratology and the measurements we will take.

Next, I design, order, and fit the patient in a two-step process. Usually, this process takes roughly a week from the evaluation and ordering to the first night of wear.

Typically, this is convenient for both the doctor and the patient. During the follow up, if the fit is suboptimal I will need to order new product for the patient. However, there are cases when this does not work for the patient, and a compressed timeline is required.

Be Flexible in Scheduling
I recently saw an out-of-town patient who had heard that we offer Ortho-K in our office. This patient had driven close to 1 ½ hours to come to our office as they could not find anyone in their area offering this specialty. I offered to make arrangements at a local hotel, and they declined, saying they could stay with a friend in a neighboring city 15 minutes away.

A week from the evaluation and ordering to the first night of wear is typically very convenient for both the doctor and the patient. However, given our compressed timeline a week was much too long. I elected to use a fit set for this patient compressing a three-week timeline into just three days.

The patient arrived for a Thursday evening appointment that my staff scheduled as the last patient of the evening. My technical staff collected essential data like visual acuity, current glasses prescription, health history, and most important several high-quality topographies of each eye. After the usual explanation of how orthokeratology works, what to expect during the initial process, risks, benefits, costs and outcome, we were ready to go.

How We Schedule Ortho-K Patients
Ortho-K patients make up about 10 percent of my busy optometric practice, and you might expect this to be difficult to integrate. However, yearly exams for Ortho-K patients, and 6-month follow-ups, are relatively easy to mix into our schedule, as they take up about the same time a normal exam or a toric contact lens follow up. The exception to this is the initial Ortho-K consult. Always schedule your initial Ortho-K evaluations at the end of the day. It leaves more time for explanations, and patients are more likely to say “yes” in a relaxed environment.

Go With Tried-and-True Fitting
With this patient, I went with the tried-and-true method of trial fitting. The best fit for the patient’s corneal topographies and corneal diameter appeared to be an I-See Ortho K lens. The process of fitting is very straightforward with this lens design, and I began with the suggested parameters from the fitting guide. After evaluating the fit, I made a tweak in my fitting from the suggested parameters as the cornea lens relationship appeared “steep.” I changed the fit to what appeared, by fluorescein, to be the optimum cornea/lens relationship.

Note: When reading post-wear topographies, I prefer to use tangential maps. Be sure to change the range from 10D to 4D or even 2D.

My staff then spent time reviewing paperwork, signing forms, and teaching the patient how to handle the retainers at home. I told them I would see them in the a.m., and the patient left in an upbeat mood.

Use Fitting Sets to Get the Right Fit
The next morning, the out-of-town patient was my first of the day. They appeared happy when they walked through the door and my mood was guardedly optimistic! My staff did the prep work including visual acuity and several topographies for each eye. My staff popped into my office to give me the run down, and the results were not exactly perfect. The right eye was great for day one 20/20 – but the left eye was lack luster at 20/30 and they were complaining about halos.

Upon inspection of the topographies, the right was well-centered, and the treatment zone looked good. The left eye was low and suggesting the retainer was not fitting properly. Normally I would have had to order a new retainer and wait a week or so for the new one to come in. However, this was not an option for this out of town patient.

Using the fit set, I was able to easily fix the problem by making the appropriate changes and sent them home with the new retainer. The next day they returned to the office for a quick follow-up. My changes worked well, and they were a solid 20/20 in each eye with a combined acuity of 20/15.

Using a fit set for this out-of-town patient made the process quicker and more efficient. It saved the patient time, as well as the doctor and the staff. It also allowed an out-of-town patient to get a service not available in their home town.

One of the pioneers of Orthokeratology, Cary Herzberg, OD, once told me, “Get a few fit sets, and just start fitting some people!” Simple advice, but incredibly powerful. So, I am going to repeat it. If you want to get started in orthokeratology, get a few fit sets and start fitting!

 

 


Matthew J. Martin, OD, FIAOMC
,
 owns Auburn Optical in Auburn, Michigan. 
Contact: auburnoptical@gmail.com

 

 

 

 

 

 

 

 

The Ortho-K Knowledge Bank

The Ortho-K Knowledge Bank provides clinical insights and strategies for practice management and business growth. It is created by Review of Optometric Business and Review of Myopia Management for sponsor GP Specialists.
Review of Optometric Business Review of Myopia Management

 

Comments
To Top